Jan 9, 2011

Reupholstering a Chair

Since I'm in the process of redoing my bedroom/office, I thought I'd share my process of reupholstering a chair. I was in the market for something pretty that could be used as an office chair when I happened to stumble upon this one for free - I found it sitting outside next to the trash bin at my old apartment. I was hesitant to take it in because it looked really dingy (there was also green fringe trim on the bottom) but after going past it several times throughout the day I finally caved.


I wanted something a bit more feminine for my office space. I had received a free can of Glidden paint in white and decided that was the color I was going to paint the wood since the original finish was badly scuffed, chipped and wearing away completely in spots. I removed the layer of green upholstery fabric to save for later, and that's when I discovered a much prettier fabric underneath (although it was really stained and gross)

This fabric was nailed on with tiny handmade nails, similar to this:



After removing what seemed like a million of them, I finally was down to the insides of the chair and that's when I realized it was full of coir and horse hair! Coir is a fiber that comes from the husk of a coconut shell (it's seen a lot today in doormats). The horse hair thing is what had me worried - what if this chair was old? I can't paint an antique white, I'd be burned at the stake! Well, after researching for several days, I couldn't find anything mentioning my chair was some super rare antique piece. There were a few similar ones that sold for $50-125 which is about what I'd end up spending on a new office chair anyways. With that in mind, I took a deep breath and started painting. 



When all was said and done, I started in on upholstering it. I kept the coir and horse hair but added some new foam on top for more support. I used the green fabric as a template to trace the pattern onto my new linen fabric.



 I stapled it on using the same method I had used in art class to stretch canvases. Starting with a staple on one end, I moved to the opposite end and pulled the fabric tight to place another staple. I then went to the untouched sides and did the same thing so that by the time I was finished, I had a cross like this:

{image via Marion Boddy-Evans - About.com}
By continually switching sides to put in staples, this ensures that your fabric will be pulled as tight as possible resulting in a professional finished look. As you can see below, I was a little slack in a few places, resulting in some waves - eep!


The next step was to add something to cover up all those staples. I could have gone with gimp, which is a really affordable option, but I really liked the look of double welting. I purchased my double welt cord from Ebay and followed this tutorial from Curbly (I didn't switch out my sewing machine foot for a double welt foot or a zipper foot and still had success). With all my pieces cut out and ready, I glued them in place using hot glue. As I was gluing I was able to pull some of the fabric a little tighter to reduce the waves a little, but someday I may end up tearing the thing apart again to fix it completely.



 


...and ta-da! The chair as it is right now. The bottom still seems a bit plain so I've been thinking of adding nail head trim. I think it would also be fun to add a toss pillow in Pantone's 2011 Color of the Year - Honeysuckle. What do you think?






4 comments:

  1. Thanks for the step-by-step instructions! I've been so nervous to reupholster set of chairs I picked up, but you make it look doable!!

    ReplyDelete
  2. Looks GREAT! I've been wanting to reupholster my couch and I'm scared. Do a couch next! haha :D

    ReplyDelete
  3. great job! you made it look easy...maybe ill tackle that one day!

    ReplyDelete
  4. Wow, this chair is stunning! It would be perfect for my dressing room!

    ReplyDelete

Blog Widget by LinkWithin